Internal RAID 5 storage cannot be used in conjunction with external storage.įront panel LED displays on the DS NVR provide heads-up information on system operation. The external storage can be configured for JBOD storage of software controlled RAID 5. External storage is supported through USB attached storage or by using the optional DSSRV-SCSI interface card connected to DX8100HDDI storage of up to 24 TB. A minimum of 3 drives is required for a RAID 5 configuration. The drives are hot-swappable when configured for internal RAID 5 storage with the optional RAID 5 controller card. With front-available drives for easy servicing and upgrades, the Digital Sentry Network Video Recorder comes with 9 TB of storage with an optical disk drive (ODD). Two DVI-D ports provide a convenient connection for high resolution digital monitors for use with HD cameras. Two gigabit network ports provide for convenient network architecture planning by allowing one port to be dedicated to IP cameras, while the second network port is used for client connections. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR. The DS NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams likely to be viewed in playback on each client, and the bandwidth required to support the client connections must be taken into consideration. The DS NVR delivers total available throughput of 280 Mbps for recording of analog and IP video streams as well as playback and export through the DS ControlPoint client. Analog streams are also supported using Pelco and third-party encoders. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5416 direct-attached encoder. The Pelco DSSRV Digital Sentry NVR (Optical Disk Drive / 9 TB) is a H.264 capable, fully scalable hardware/software solution optimized to deliver the essential support required for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software.īoosted by the second generation Intel Core i7 processor and 8 GB of RAM, Digital Sentry NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. User manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR The user manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR provides necessary instructions for the proper use of the product Surveillance - Surveillance Video - Network Video Recorders (NVRs). We recommend checking out our discussion threads on the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR, which address similar problems with connecting and setting up Network Video Recorders (NVRs) Pelco. Startup and operation of the network video recorders (nvrs).Product classification: Surveillance - Surveillance Video - Network Video Recorders (NVRs).Basic description and contents of package.User manual for Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR Operating instructions and pdf manual for use - Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR User manual, User manual Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR, Pelco, DSSRV, Digital, Sentry, NVR, DSSRV090DVDUSDVR, Video User manual Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR With support for high definition multi-monitor navigation and control, DS ControlPoint provides a tabbed environment that allows the end user to quickly switch between several work spaces.User manual Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR | | User manual here! DS ControlPoint interfaces with DX4100, DX4500, DX4600, DX4700, DX4800, DX8000, DX8100, and all DVMS software to enable seamless and progressive migration from analog to IP environments. Front panel LED displays on the DS-CPPC are integrated with the new Digital Sentry System Information (DSSI) utility, providing critical, real-time statistics on system resource utilization, temperature, and throughput status.ĭS ControlPoint is a revolutionary graphical user interface that allows users to monitor and manage any combination of analog and IP devices through a single digital video surveillance software application. Boosted by the 4th Generation Intel® Xeon processor and 8 GB of RAM, DS-CPPC provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The Digital Sentry ControlPoint Workstation (DS-CPPC) is optimized to deliver the essential hardware support for the DS ControlPoint software without the extra cost or risk of integrating hardware and software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |